Racelogic USER GUIDE Manual de Instruções descarregar pdf (Página 18)

Revision 13 Page 18 of 35

9. The progress bar gives a visual indication of the current progress through the scenario file being replayed.

10. The total duration of the scenario selected, and the progress of the scenario replay are also shown on the LabSat software, above.

11. The replay of the file can be stopped and restarted by pressing the ‘Stop’ button then the ‘Play’ button at any point during Playback.

12. Depending on the sensitivity of the GNSS engine under test, it may be necessary to adjust the output attenuation control slider. This can be used to

vary the output power of the LabSat from a nominal -85dBm down to -115dB. In the example below, the digital output attenuator has been set to

provide 15.5 dB of attenuation. It is recommended to try the 0dB slider setting (-85dBm output) first. If the GPS engine under test does not lock onto

Browse

Button

Play Button

Info

Button

Progress

Bar

Replay

Mode

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 34 35

Comentários a estes Manuais

Sem comentários

Racelogic USER GUIDE Manual de Instruções Página 18

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de navegação Racelogic USER GUIDE