Racelogic USER GUIDE Manual do Utilizador descarregar pdf (Página 13)

RACELOGIC Traction Control Manual V3.0

Page 13

1.5.3 Connecting Traction Control ABS Wires

The 4 traction control ABS wires are coloured Red, Blue, Yellow and Green and form

the 4 core shielded cable.

Connect each wire from the traction control loom to each of the 4 ABS sensor wires

as follows.

• Strip back the shielding of the ABS wire exposing the cores.

• Tin the cores using the soldering iron and solder.

• Strip back the shielding of the traction control wire.

•

Tin the cores using the soldering iron and solder.

• Solder the traction control Wire to the ABS wire.

• Cover the joint with insulation tape.

The ABS connections can be tested using either a laptop computer or the diagnostic

facility on the traction control.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 66 67

Sem comentários

Racelogic USER GUIDE Manual do Utilizador Página 13