Racelogic USER GUIDE Manual do Utilizador descarregar pdf (Página 58)

RACELOGIC Traction Control Manual V3.0

Page 58

Hole detection - The reference holes have to be bigger than the head of the

sensor, bigger ones are preferable.

Other

- If none of the methods above are practical, then it is worth noting that the

sensor can pick up from evenly spaced fixing bolts, or cooling vanes in a brake disc

etc.

It is recommended that the sensors are shielded from any stray stones thrown from

the wheels and kept well away from any other source of electrical noise (HT leads,

radio leads, coil power supply leads etc.).

Racelogic have fitted numerous cars and have found that the best method of fitment

is to pick up from the back of the wheel fixing bolts.

5.3 Sensor Fitting

The sensor is mounted by the two nuts that are supplied with the sensor. When

tightening the sensor, care has to be taken as the sensor can be split in half or cross-

threaded if over tightened. It is recommended that a thread lock be used to stop the

nuts becoming loose.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 66 67

Sem comentários

Racelogic USER GUIDE Manual do Utilizador Página 58